|
 |
AML Model 2800 USB Decoder
The Model 2800 USB bar code and magnetic stripe reader combines features found in a variety of readers into one compact, easy to use system. The M2800's USB interface functions as a USB HID keyboard emulator, and will appear on the connected PC as an HID keyboard device. No custom USB drivers are required, as all USB HID drivers are included with Microsoft Windows®. Input data is sent to the PC as though it was typed in directly from the keyboard.
The M2800 accepts a wide variety of input devices such as laser, CCD, wand, magnetic stripe reader, slot reader, and RS-232 serial input. The RS232 interface is mainly used as an input, but resembles a serial port found on a standard PC. The RS232 port is meant to connect serial input devices using a null-modem cable. The M2800 functions well as an RS232 serial to keyboard converter.
Custom bar code decoding algorithms are used, imbuing the M2800 with the ability to read the most poorly printed barcodes, even ones not typically readable by other systems. The M2800 is capable of reading EAN, UPC, and all RSS symbologies and so is compliant with Global Tracking Identification Number (GTIN) requirements. The magnetic card reader performance exceeds that of the typical reader, supporting bi-directional swipes, and is tolerant of either very rapid or extremely slow swipes.
The M2800 system is pre-configured to meet the needs of most users, but you may customize the M2800 to your individual application by changing the default settings using the M2800 setup menu barcode sheet. Robust construction, ease of use, and the quality of features make the Model 2800 an ideal data collection device for retail, industrial, or any data tracking application.
|
 | - Bar code, magnetic card, and serial data appear as keyboard input to the PC.
- Automatically recognizes different bar code types (auto-discriminates)
- Exceptional first read rates, even on faded or poor quality bar codes by using advanced decoding algorithms
- Supports practically any 5 volt undecoded bar code input device (laser, CCD, wand, slot reader)
- Reads single / dual track magnetic cards of all standard track formats (credit cards, ID cards, etc.)
- Easily connects to your PC computer through USB interface
- Power / Ready light indicates scanner status
- Automatically sends data in the correct upper / lower case
- Easily programmed by scanning bar codes from the reader setup menu.
- Accepts data from the RS-232 input port (electronic scales, portable terminals, etc.)
|
| The M2800-0000 KIT contains all of the following products: | | 6 Foot USB Cable more... | | | Product CD more... | | | M2800 Reader Setup Menu more... | |
 | |
| | Bar Codes | | Auto-discriminates between: Code 39, Extended Code 39 (Full ASCII), UPC-A, UPC-E(0), UPC-E(1), EAN-8, EAN-13, UPC & EAN Supplements (2 and 5 character), Interleaved 2 of 5, Codabar, Code 128, Code 93, Code 11, MSI/Plessey, RSS14 (Both Linear and Stackable Types), RSS Limited, RSS Expanded (Both Linear and Stackable Types) | | | | | | Input Device | | Laser, CCDs, Wand, Slot Reader, Magnetic Stripe Reader (Single or Dual Track), or RS-232 Input Port (Electronic Scales, Portable Terminals) | | | | | | Physical | | 5 1/4" L x 5 1/8" W x 1 1/2" H, 14 oz. | | | | | | Operating Temperature | | 0° to +50° C | | | | | | Storage Temperature | | -30° to +70° C | | | | | | Relative Humidity | | 5% to 95% (non-condensing) | | | | | | Power | | M2800 receives it power from the PC USB interface. Idle power consumption = 0.25 watts, during USB suspend = 1.25mW. | | | | | | Serial Port | | Baud Rates: 1200, 2400, 4800, 9600, 19.2K. Parity: None, Odd, Even, Mark. Data Bits: 7 (with parity) or 8 (with none). Signals: Transmit Data, Receive Data, CTS and RTS loop-back. Flow Control Protocol: None or XON/XOFF. Features: Programmable Termination Character and Timeout. | | | | | | Indicators | | Audio beep indicates successful read. A red/green LED indicates status of M2800. | | | | | | Special Keys | | Function Keys F1-F10, Ctrl, Alt, Shift, Home, End, PgUp, PgDn, Ins, Del, Arrow Keys | | | | | | Termination Character | | Horizontal Tab (ASCII 09) or (Special Keys On: USB Tab Key), Carriage Return (ASCII 13) or (Special Keys On: USB Key), USB Numeric Keypad Enter, User Defined Termination Character (From ASCII chart). | | | | | | USB Interface | | USB Spec. 1.0 - 2.0 Functionally Compliant. Use a standard USB cable 3 Meters or less in length. | | | | | | Warranty | | Two Year | | | |
|
|
|
|
0
$0.00
